Product Description
NEXUS PaveCareTM PRO-820 ECO Invisible Water-based Sealer is designed for all types of porcelain, natural stone or concrete paving, whether it is inside or out.
The PaveCareTM PRO-820 ECO Invisible Waterbased Sealer can be applied to stone, concrete or porcelain paving prior to grouting to minimise any grout haze or resin sheen, or alternatively paving can be teated once the grout/jointing material has been applied and fully cured. The water-based sealer impregnates the surface of the paving to give an invisible and lasting protection against dirt, staining and natural weathering.
- Professional strength invisible sealer
- Impregnates the surface of the stone or porcelain for lasting protection against water-penetration, staining and natural weathering
- Water-based – can be used all year round
- High coverage rate: stone up to 15m2 per litre, porcelain up to 30m2 per litre
- Ideal for all types of textured porcelain or natural stone
- Suitable for interior and exterior paving
application…
(full instructions are printed on each container)
The PaveCareTM Pre-Grout Stone & Porcelain Paving Sealer is designed as an invisible coating but may darken very
light surfaces slightly – as with all sealants, test on a small inconspicuous area before full application.
Supplied ready to use The PaveCareTM Pre-Grout Stone & Porcelain Paving Sealer is simple to apply to clean
paving with a surface temperature of 5oC to 25oC.
1 Shake the container well.
2 Apply a complete and even coat over the whole surface of the paving using
a brush, roller or spray, ensuring any excess is removed.
3 Allow to dry for 30 minutes.
4 Apply a second even coat and leave to cure (around 1 hour depending on temperature).
